How test the sample heater on a Series 5500 Silica or Phosphate (120 VAC Models Only).

Document ID

Document ID TE7050

Published Date

Published Date 03/04/2020
Question
How test the sample heater on a Series 5500 Silica or Phosphate (120 VAC Models Only).
Answer
With power removed from the analyzer, disconnect the heating element from J15 on the interconnect printed circuit board (PCB), and using an ohmmeter test the resistance between the two black wires. It should read approximately 110 ohms.

Was this answer helpful?

Submitting...
Thank you for your feedback!
There was an error with your submission. Please try again.